Code Search for Developers
 
 
  

fbset.c from openap at Krugle


Show fbset.c syntax highlighted

/* vi: set sw=4 ts=4: */
/*
 * Mini fbset implementation for busybox
 *
 * Copyright (C) 1999 by Randolph Chung <tausq@debian.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 * This is a from-scratch implementation of fbset; but the de facto fbset
 * implementation was a good reference. fbset (original) is released under
 * the GPL, and is (c) 1995-1999 by: 
 *     Geert Uytterhoeven (Geert.Uytterhoeven@cs.kuleuven.ac.be)
 */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <ctype.h>
#include <string.h>
#include <sys/ioctl.h>
#include "busybox.h"

#define DEFAULTFBDEV  "/dev/fb0"
#define DEFAULTFBMODE "/etc/fb.modes"

static const int OPT_CHANGE   = (1 << 0);
static const int OPT_INFO     = (1 << 1);
static const int OPT_READMODE = (1 << 2);

enum {
	CMD_FB = 1,
	CMD_DB = 2,
	CMD_GEOMETRY = 3,
	CMD_TIMING = 4,
	CMD_ACCEL = 5,
	CMD_HSYNC = 6,
	CMD_VSYNC = 7,
	CMD_LACED = 8,
	CMD_DOUBLE = 9,
/* 	CMD_XCOMPAT =     10, */
	CMD_ALL = 11,
	CMD_INFO = 12,
	CMD_CHANGE = 13,

#ifdef BB_FEATURE_FBSET_FANCY
	CMD_XRES = 100,
	CMD_YRES = 101,
	CMD_VXRES = 102,
	CMD_VYRES = 103,
	CMD_DEPTH = 104,
	CMD_MATCH = 105,
	CMD_PIXCLOCK = 106,
	CMD_LEFT = 107,
	CMD_RIGHT = 108,
	CMD_UPPER = 109,
	CMD_LOWER = 110,
	CMD_HSLEN = 111,
	CMD_VSLEN = 112,
	CMD_CSYNC = 113,
	CMD_GSYNC = 114,
	CMD_EXTSYNC = 115,
	CMD_BCAST = 116,
	CMD_RGBA = 117,
	CMD_STEP = 118,
	CMD_MOVE = 119,
#endif
};

static unsigned int g_options = 0;

/* Stuff stolen from the kernel's fb.h */
static const int FBIOGET_VSCREENINFO = 0x4600;
static const int FBIOPUT_VSCREENINFO = 0x4601;
#define __u32			unsigned int
struct fb_bitfield {
	__u32 offset;			/* beginning of bitfield	*/
	__u32 length;			/* length of bitfield		*/
	__u32 msb_right;		/* != 0 : Most significant bit is */ 
					/* right */ 
};
struct fb_var_screeninfo {
	__u32 xres;			/* visible resolution		*/
	__u32 yres;
	__u32 xres_virtual;		/* virtual resolution		*/
	__u32 yres_virtual;
	__u32 xoffset;			/* offset from virtual to visible */
	__u32 yoffset;			/* resolution			*/

	__u32 bits_per_pixel;		/* guess what			*/
	__u32 grayscale;		/* != 0 Graylevels instead of colors */

	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
	struct fb_bitfield green;	/* else only length is significant */
	struct fb_bitfield blue;
	struct fb_bitfield transp;	/* transparency			*/	

	__u32 nonstd;			/* != 0 Non standard pixel format */

	__u32 activate;			/* see FB_ACTIVATE_*		*/

	__u32 height;			/* height of picture in mm    */
	__u32 width;			/* width of picture in mm     */

	__u32 accel_flags;		/* acceleration flags (hints)	*/

	/* Timing: All values in pixclocks, except pixclock (of course) */
	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
	__u32 left_margin;		/* time from sync to picture	*/
	__u32 right_margin;		/* time from picture to sync	*/
	__u32 upper_margin;		/* time from sync to picture	*/
	__u32 lower_margin;
	__u32 hsync_len;		/* length of horizontal sync	*/
	__u32 vsync_len;		/* length of vertical sync	*/
	__u32 sync;			/* see FB_SYNC_*		*/
	__u32 vmode;			/* see FB_VMODE_*		*/
	__u32 reserved[6];		/* Reserved for future compatibility */
};


static struct cmdoptions_t {
	char *name;
	unsigned char param_count;
	unsigned char code;
} g_cmdoptions[] = {
	{
	"-fb", 1, CMD_FB}, {
	"-db", 1, CMD_DB}, {
	"-a", 0, CMD_ALL}, {
	"-i", 0, CMD_INFO}, {
	"-g", 5, CMD_GEOMETRY}, {
	"-t", 7, CMD_TIMING}, {
	"-accel", 1, CMD_ACCEL}, {
	"-hsync", 1, CMD_HSYNC}, {
	"-vsync", 1, CMD_VSYNC}, {
	"-laced", 1, CMD_LACED}, {
	"-double", 1, CMD_DOUBLE}, {
	"-n", 0, CMD_CHANGE}, {
#ifdef BB_FEATURE_FBSET_FANCY
	"-all", 0, CMD_ALL}, {
	"-xres", 1, CMD_XRES}, {
	"-yres", 1, CMD_YRES}, {
	"-vxres", 1, CMD_VXRES}, {
	"-vyres", 1, CMD_VYRES}, {
	"-depth", 1, CMD_DEPTH}, {
	"-match", 0, CMD_MATCH}, {
	"-geometry", 5, CMD_GEOMETRY}, {
	"-pixclock", 1, CMD_PIXCLOCK}, {
	"-left", 1, CMD_LEFT}, {
	"-right", 1, CMD_RIGHT}, {
	"-upper", 1, CMD_UPPER}, {
	"-lower", 1, CMD_LOWER}, {
	"-hslen", 1, CMD_HSLEN}, {
	"-vslen", 1, CMD_VSLEN}, {
	"-timings", 7, CMD_TIMING}, {
	"-csync", 1, CMD_CSYNC}, {
	"-gsync", 1, CMD_GSYNC}, {
	"-extsync", 1, CMD_EXTSYNC}, {
	"-bcast", 1, CMD_BCAST}, {
	"-rgba", 1, CMD_RGBA}, {
	"-step", 1, CMD_STEP}, {
	"-move", 1, CMD_MOVE}, {
#endif
	0, 0, 0}
};

#ifdef BB_FEATURE_FBSET_READMODE
/* taken from linux/fb.h */
static const int FB_VMODE_INTERLACED = 1;	/* interlaced	*/
static const int FB_VMODE_DOUBLE = 2;	/* double scan */
static const int FB_SYNC_HOR_HIGH_ACT = 1;	/* horizontal sync high active	*/
static const int FB_SYNC_VERT_HIGH_ACT = 2;	/* vertical sync high active	*/
static const int FB_SYNC_EXT = 4;	/* external sync		*/
static const int FB_SYNC_COMP_HIGH_ACT = 8;	/* composite sync high active   */
#endif
static int readmode(struct fb_var_screeninfo *base, const char *fn,
					const char *mode)
{
#ifdef BB_FEATURE_FBSET_READMODE
	FILE *f;
	char buf[256];
	char *p = buf;

	f = xfopen(fn, "r");
	while (!feof(f)) {
		fgets(buf, sizeof(buf), f);
		if ((p = strstr(buf, "mode ")) || (p = strstr(buf, "mode\t"))) {
			p += 5;
			if ((p = strstr(buf, mode))) {
				p += strlen(mode);
				if (!isspace(*p) && (*p != 0) && (*p != '"')
					&& (*p != '\r') && (*p != '\n'))
					continue;	/* almost, but not quite */
				while (!feof(f)) {
					fgets(buf, sizeof(buf), f);

                    if ((p = strstr(buf, "geometry "))) {
                        p += 9;

                        sscanf(p, "%d %d %d %d %d", 
                                &(base->xres), &(base->yres), 
                                &(base->xres_virtual), &(base->yres_virtual), 
                                &(base->bits_per_pixel));
                    } else if ((p = strstr(buf, "timings "))) {
                        p += 8;
                        
                        sscanf(p, "%d %d %d %d %d %d %d",
                                &(base->pixclock),
                                &(base->left_margin), &(base->right_margin),
                                &(base->upper_margin), &(base->lower_margin),
                                &(base->hsync_len), &(base->vsync_len));
                    } else if ((p = strstr(buf, "laced "))) {
                        p += 6;

                        if (strstr(buf, "false")) {
                            base->vmode &= ~FB_VMODE_INTERLACED;
                        } else {
                            base->vmode |= FB_VMODE_INTERLACED;
                        }
                    } else if ((p = strstr(buf, "double "))) {
                        p += 7;

                        if (strstr(buf, "false")) {
                            base->vmode &= ~FB_VMODE_DOUBLE;
                        } else {
                            base->vmode |= FB_VMODE_DOUBLE;
                        }
                    } else if ((p = strstr(buf, "vsync "))) {
                        p += 6;

                        if (strstr(buf, "low")) {
                            base->sync &= ~FB_SYNC_VERT_HIGH_ACT;
                        } else {
                            base->sync |= FB_SYNC_VERT_HIGH_ACT;
                        }
                    } else if ((p = strstr(buf, "hsync "))) {
                        p += 6;

                        if (strstr(buf, "low")) {
                            base->sync &= ~FB_SYNC_HOR_HIGH_ACT;
                        } else {
                            base->sync |= FB_SYNC_HOR_HIGH_ACT;
                        }
                    } else if ((p = strstr(buf, "csync "))) {
                        p += 6;

                        if (strstr(buf, "low")) {
                            base->sync &= ~FB_SYNC_COMP_HIGH_ACT;
                        } else {
                            base->sync |= FB_SYNC_COMP_HIGH_ACT;
                        }
                    } else if ((p = strstr(buf, "extsync "))) {
                        p += 8;

                        if (strstr(buf, "false")) {
                            base->sync &= ~FB_SYNC_EXT;
                        } else {
                            base->sync |= FB_SYNC_EXT;
                        }
                    }
                    
					if (strstr(buf, "endmode"))
						return 1;
				}
			}
		}
	}
#else
	error_msg( "mode reading not compiled in");
#endif
	return 0;
}

static void setmode(struct fb_var_screeninfo *base,
					struct fb_var_screeninfo *set)
{
	if ((int) set->xres > 0)
		base->xres = set->xres;
	if ((int) set->yres > 0)
		base->yres = set->yres;
	if ((int) set->xres_virtual > 0)
		base->xres_virtual = set->xres_virtual;
	if ((int) set->yres_virtual > 0)
		base->yres_virtual = set->yres_virtual;
	if ((int) set->bits_per_pixel > 0)
		base->bits_per_pixel = set->bits_per_pixel;
}

static void showmode(struct fb_var_screeninfo *v)
{
	double drate = 0, hrate = 0, vrate = 0;

	if (v->pixclock) {
		drate = 1e12 / v->pixclock;
		hrate =
			drate / (v->left_margin + v->xres + v->right_margin +
					 v->hsync_len);
		vrate =
			hrate / (v->upper_margin + v->yres + v->lower_margin +
					 v->vsync_len);
	}
	printf("\nmode \"%ux%u-%u\"\n", v->xres, v->yres, (int) (vrate + 0.5));
#ifdef BB_FEATURE_FBSET_FANCY
	printf("\t# D: %.3f MHz, H: %.3f kHz, V: %.3f Hz\n", drate / 1e6,
		   hrate / 1e3, vrate);
#endif
	printf("\tgeometry %u %u %u %u %u\n", v->xres, v->yres,
		   v->xres_virtual, v->yres_virtual, v->bits_per_pixel);
	printf("\ttimings %u %u %u %u %u %u %u\n", v->pixclock, v->left_margin,
		   v->right_margin, v->upper_margin, v->lower_margin, v->hsync_len,
		   v->vsync_len);
	printf("\taccel %s\n", (v->accel_flags > 0 ? "true" : "false"));
	printf("\trgba %u/%u,%u/%u,%u/%u,%u/%u\n", v->red.length,
		   v->red.offset, v->green.length, v->green.offset, v->blue.length,
		   v->blue.offset, v->transp.length, v->transp.offset);
	printf("endmode\n\n");
}

#ifdef STANDALONE
int main(int argc, char **argv)
#else
extern int fbset_main(int argc, char **argv)
#endif
{
	struct fb_var_screeninfo var, varset;
	int fh, i;
	char *fbdev = DEFAULTFBDEV;
	char *modefile = DEFAULTFBMODE;
	char *thisarg, *mode = NULL;

	memset(&varset, 0xFF, sizeof(varset));

	/* parse cmd args.... why do they have to make things so difficult? */
	argv++;
	argc--;
	for (; argc > 0 && (thisarg = *argv); argc--, argv++) {
		for (i = 0; g_cmdoptions[i].name; i++) {
			if (!strcmp(thisarg, g_cmdoptions[i].name)) {
				if (argc - 1 < g_cmdoptions[i].param_count)
					show_usage();
				switch (g_cmdoptions[i].code) {
				case CMD_FB:
					fbdev = argv[1];
					break;
				case CMD_DB:
					modefile = argv[1];
					break;
				case CMD_GEOMETRY:
					varset.xres = strtoul(argv[1], 0, 0);
					varset.yres = strtoul(argv[2], 0, 0);
					varset.xres_virtual = strtoul(argv[3], 0, 0);
					varset.yres_virtual = strtoul(argv[4], 0, 0);
					varset.bits_per_pixel = strtoul(argv[5], 0, 0);
					break;
				case CMD_TIMING:
					varset.pixclock = strtoul(argv[1], 0, 0);
					varset.left_margin = strtoul(argv[2], 0, 0);
					varset.right_margin = strtoul(argv[3], 0, 0);
					varset.upper_margin = strtoul(argv[4], 0, 0);
					varset.lower_margin = strtoul(argv[5], 0, 0);
					varset.hsync_len = strtoul(argv[6], 0, 0);
					varset.vsync_len = strtoul(argv[7], 0, 0);
					break;
                case CMD_CHANGE:
                    g_options |= OPT_CHANGE;
                    break;
#ifdef BB_FEATURE_FBSET_FANCY
				case CMD_XRES:
					varset.xres = strtoul(argv[1], 0, 0);
					break;
				case CMD_YRES:
					varset.yres = strtoul(argv[1], 0, 0);
					break;
#endif
				}
				argc -= g_cmdoptions[i].param_count;
				argv += g_cmdoptions[i].param_count;
				break;
			}
		}
		if (!g_cmdoptions[i].name) {
			if (argc == 1) {
				mode = *argv;
				g_options |= OPT_READMODE;
			} else {
				show_usage();
			}
		}
	}

	if ((fh = open(fbdev, O_RDONLY)) < 0)
		perror_msg_and_die("fbset(open)");
	if (ioctl(fh, FBIOGET_VSCREENINFO, &var))
		perror_msg_and_die("fbset(ioctl)");
	if (g_options & OPT_READMODE) {
		if (!readmode(&var, modefile, mode)) {
			error_msg("Unknown video mode `%s'", mode);
			return EXIT_FAILURE;
		}
	}

	setmode(&var, &varset);
	if (g_options & OPT_CHANGE)
		if (ioctl(fh, FBIOPUT_VSCREENINFO, &var))
			perror_msg_and_die("fbset(ioctl)");
	showmode(&var);
	/* Don't close the file, as exiting will take care of that */
	/* close(fh); */

	return EXIT_SUCCESS;
}




See more files for this project here

openap

OpenAP is the complete distribution of open-source software that is required to produce a fully 802.11b compliant wireless access point. OpenAP is also a platform on which developers and hobbyists may realize their ideas. Since the build environment and s

Project homepage: http://savannah.nongnu.org/projects/openap
Programming language(s): Assembly,C
License: gpl2

  bootfloppy/
  debian/
  docs/
  facility/
  kernel-patches/
  libbb/
  pwd_grp/
  scripts/
  tests/
  .indent.pro
  AUTHORS
  Changelog
  Config.h
  INSTALL
  LICENSE
  Makefile
  README
  TODO
  adjtimex.c
  applets.c
  applets.h
  ar.c
  ash.c
  basename.c
  busybox.c
  busybox.h
  busybox.mkll
  busybox.sh
  busybox.spec
  cat.c
  chgrp.c
  chmod.c
  chown.c
  chroot.c
  chvt.c
  clear.c
  cmdedit.c
  cmdedit.h
  cmp.c
  cp.c
  cpio.c
  cut.c
  date.c
  dc.c
  dd.c
  deallocvt.c
  df.c
  dirname.c
  dmesg.c
  dos2unix.c
  dpkg.c
  dpkg_deb.c
  du.c
  dumpkmap.c
  dutmp.c
  echo.c
  env.c
  expr.c
  fbset.c
  fdflush.c
  find.c
  free.c
  freeramdisk.c
  fsck_minix.c
  getopt.c
  grep.c
  gunzip.c
  gzip.c
  halt.c
  head.c
  hostid.c
  hostname.c
  hush.c
  id.c
  ifconfig.c
  init.c
  insmod.c
  install.sh
  kill.c
  klogd.c
  lash.c
  length.c
  ln.c
  loadacm.c
  loadfont.c
  loadkmap.c
  logger.c
  logname.c
  logread.c
  ls.c
  lsmod.c
  makedevs.c
  md5sum.c
  mk_loop_h.sh
  mkdir.c
  mkfifo.c
  mkfs_minix.c
  mknod.c
  mkswap.c
  mktemp.c
  modprobe.c
  more.c
  mount.c
  msh.c
  mt.c
  mv.c